The update DE24R system is with best power supply . It can fire balloons with talon igniteres.

The whole system is including one remote controller, one receiver and a power plug for AC.

Brief Instruction   

DE Series firing system worked by 110/220V AC or 12/24V DC.  It has the “test” function. Each channel could fire about 20pcs igniters if by AC, about 10pcs igniters by DC. This series firing system could “salvo fire”,“sequential fire”   and “step by step fire”.Time range is from 0.1-4.8s. It can be remote and manual control.  

Remote control manual

1.Select any channel that you need to fire: first move the drive plate on the right size of remote to the channel that you need to fire(for example,if you need fire channel 5,move to 5)and then press the red fire button on remote to fire the receivers that you need to fire;

If you need to fire the receivers one by one, you just need to keep pressing the red button on remote, it can fire the receivers one by one automatically, you don’t need to move the drive plate.

2.Fire all: move the drive plate to “--”,and pressing the red button on remote, all the receivers will fire together.

3.Sequential fire: move the drive plate to “1-48” and then press the drive plate one time, the digital table will flashing .(For example, move to “1-10”) it means the sequential time is 1 second , all the receivers will fire sequentially by this time. You can select other sequential time by the drive plate, and please find the table below.”figure’s key”means the number on drive plate, “interval S” means the sequential time;When you press the drive table again, it will not flashing ,and now you can select any receiver to fire or step fire.